SmartNode 4520 & 4110 Quick Start Guide
3
Option 1:
Connect to a network that has a DHCP server
(SN4520 & SN4110).
Using
the included black Ethernet cable, connect the SmartNode RJ-45 Ethernet WAN port,
labeled
ETH0/0
(see
figure 1
), to an Ethernet hub or switch on the same network as
your PC. WAN interface
ETH0/0
is configured as DHCP client.
Figure 1.
Connecting the SmartNode to your PC through a hub or switch
Figure 2.
Connecting the SmartNode directly to your PC
Option 2: Connect directly to a PC (SN4520 only).
LAN interface
ETH0/1
is configured as DHCP server (see
figure 2
).
1.
Configure your PC as a DHCP client.
Note
The procedures below are for Microsoft Windows. For another operating
system, refer to the operating instruction that came with your PC.
2.
Right-click on
My Network Places
and select
Properties
in the context menu (see
figure 3
).
DHCP
Server
Ethernet Hub
or Switch
SmartNode
PC
ETHO/O
0/3
0/2
0/1
0/0
Vo
ice
Po
rts
FX
S
ET
H
0/
0
0/3
0/2
0/1
0/0
Vo
ice
P
orts
FX
S
SmartNode
4520
PC
ETHO/1
ET
H 0/
1
ET
H 0
/0
