SmartNode OpenScape Business Appliance Quick Start Guide
3
1.0 What’s Included With the SN-OSB
•
SmartNode OpenScape Business (SN-OSB) Appliance
•
AC Power Adapter
•
INS-KIT-2
– 1 x D89 to RJ45 control port Adapter (EIA-561)
– 2 x RJ45 Cables, 10 ft
– Rubber Feet
– Rack Ears and Hardware (already installed)
•
Electrical Safety Notice
2.0 Steps for Setting Up the SN-OSB
1.
Plug the power adapter into the power connector on the back of the unit
(see
figure 1
).
2.
Connect an Ethernet cable from the Ethernet switch to port LAN2 (CPU
I/O side).
3.
Connect the second Ethernet cable between the Ethernet switch and
port ETH 0/1 on the SmartNode Gateway side.
4.
Connect your computer to the Ethernet switch. An IP address will be
assigned to your PC. refer to section 5.1 below
5.
Push the power Button at the back of the unit once (see
figure 1
).
