SmartNode 5501 Overview
18
SmartNode 5501 User Manual
1
• General Information
Table 3. SmartNode 5501 LEDs
LED
Description
Note
If an error occurs, all LEDs will flash solid for MORE
than 5 seconds before the device reboots
Power
When lit, indicates power is applied. Blinks fast during bootloader phase
and blinks slow during boot process of Trinity Software. Becomes solid
when the system is up and running.
VoIP Link
•
On indicates the gateway is registered to a SIP server, or, a SIP
device has registered to the SN5501.
•
Off indicates the unit is not configured or registered, or has no active
direct routed VoIP connection.
AUX 1 & AUX 2
Auxiliary LEDs for future use.
ETH 0 – ETH 1
•
On when the Ethernet connection on the corresponding port has a
link indication.
•
Flashes when data is received or transmitted at the corresponding
Ethernet port.
GIG 0 – GIG 1
•
On when the Ethernet is connected to a 1000Mb network.
•
Off when the Ethernet is connected to a 10Mb or 100Mb network or
not connected
Содержание SmartNode 5501
Страница 19: ...19 Chapter 2 Applications Overview Chapter contents Introduction 20 Typical Application 20...
Страница 40: ...40 Appendix C Cabling Chapter contents Introduction 41 Serial Console 41 Ethernet 42...
Страница 44: ...44 Appendix D Port pin outs Chapter contents Introduction 45 Console port 45 Ethernet 45...
Страница 47: ...47 Appendix E SmartNode 5501 Factory Configuration Chapter contents Introduction 48...