Patton SmartNode 5480 Series, Руководство пользователя

Страница: 28 / 58

Installing the SmartNode 28
SmartNode 5480 & 5490 User Manual 3
•
SmartNode Installation
Connecting the power supply
The 5400 has the option of an internal or external Internal AC Power Supply , see Figure 8 .
Internal AC Power Supply.
1.
Insert the female end of the AC power to the mains port.
Figure 8. SN5480/5490 rear panel
2.
Verify that the AC power cord included with your SmartNode is compatible with local standards. If it is
not, refer to
“Contacting Patton for Assistance” on page 34 to find out how to replace it with a compatible
power cord.
3.
Connect the male end of the AC power cord to an appropriate AC power outlet.
Figure 9. SN5480/5490 Power LED
4.
Verify that the green Power LED is lit (see Figure 9 ).
•
Do not connect power to the AC Mains at this time.
•
There are no user-serviceable parts in the power supply sec
tion of the Model 5400. Contact Patton Electronics Technical
support at (301)975-1007, via our web site at
http://www.patton.com, or by e-mail at support@patton.com,
for more information.
•
The internal power supply automatically adjusts to accept an
input voltage from 100 to 240 VAC (50/60 Hz).
Verify that the proper voltage is present before plugging the
power cord into the receptacle. Failure to do so could result in
equipment damage.
WARNING
ACT
LINK
RS
-23
2
Co
nso
le
ET
H 0
/0
ET
H 0
/1
Reset
12V
, 1.25A
–
+
ETH 0/0
10/100/1000Base-T port
RESET button
Console
RS-232 port
ETH 0/1
10/100/1000Base-T port
Power
(~120–240V, 50/60 Hz, 1A)
*DSL port
(SN5490 only)
SN5480 model shown
SmartNode 5480
Enterprise Session Border Router
Power