Patton SmartNode 4970A Series, Руководство пользователя

Страница: 52 / 57

Introduction 52
SmartNode 4970A User Manual F • Reset Button Functions
Introduction
The Reset button (see figure 16 on page 52) is used to do the following:
• Reboot the SmartNode device (see section “Resetting the SmartNode device when it is operating and the
Power LED is lit” on page 52)
• Erase the startup-config settings, which is followed by a SmartNode device reboot as indicated by the slow
blinking of all LEDs (see section “Resetting the SmartNode device when it is operating and the Power LED
is lit” on page 52)
• Factory reset, which is followed by a device reboot as indicated by the fast blinking of all LEDs (see section
“Resetting the SmartNode device when it is operating and the Power LED is lit” on page 52)
• Troubleshoot the SmartNode device if it is not booting properly (see section “Resetting the SmartNode device
when it is initially powered off ” on page 53)
Figure 16. SN4970A Reset button
Resetting the SmartNode device when it is operating and the Power LED
is lit
The Reset button has the following behaviors depending on how many seconds (see figure 17 ) the button is
pressed (see table 9 on page 53 for the results from pressing the button).
Figure 17. Reset button periods (in seconds) for performing actions