Introduction
41
SmartNode 4970A User Manual
C
• Cabling
Introduction
This section provides information on the cables used to connect the SmartNode and the interface cards to the
existing network infrastructure and to third party products.
Console
The SmartNode can be connected to a serial terminal over its serial console port, as depicted in figure 8.
Figure 8. Connecting a serial terminal
Note
on page 47 for console port pin-outs.
The interconnecting cables shall be acceptable for external use
and shall be rated for the proper application with respect to volt-
age, current, anticipated temperature, flammability, and
mechanical serviceability.
CAUTION
Serial Terminal
Note
A Patton Model 16F-561 RJ45 to DB-9 adapter is included with
each SmartNode 4970 Series device
RS-23
2
Cons
ole
ETH
0/1
Reset
0/0
0/1
0/2
0/3
T1/E
1
Содержание SmartNode 4970A Series
Страница 18: ...18 Chapter 2 Applications overview Chapter contents Introduction 19 Application Convert Legacy PBX to VoIP 19...
Страница 40: ...40 Appendix C Cabling Chapter contents Introduction 41 Console 41 Ethernet 42 E1 PRI 43 T1 PRI 44...
Страница 46: ...46 Appendix D Port pin outs Chapter contents Introduction 47 Console port 47 Ethernet 47 PRI port 48...
Страница 49: ...49 Appendix E SmartNode 4970A factory configuration Chapter contents Introduction 50...
