background image

 

Connecting a PC, logging in, and configuring the LAN IP address

 

4

 

SmartNode 4900 Quick Start Guide 

 

Connecting a PC, logging in, and configuring the LAN IP address

 

Connecting power and configuring the default IP address

 

Connect the SmartNode to the mains power supply using the included power supply and cable. When the 

 

RUN

 

 LED stops blinking and remains lit, the SmartNode is ready.

The factory default IP settings are listed in 

table 1

. If these addresses do not work with your network they must 

be changed. Contact your network administrator if you are not sure which IP address to use in 
your installation.

 

Note

 

The DHCP server is running on the ETH 0/1 of the SN4900 Series 
models. All Ethernet ports are pre-configured and active.

 

Connecting to a PC and logging in

 

1.

 

To access the SmartNode configuration, connect a PC equipped with an RS-232 console port to the 

 

Con-

sole

 

 port on the front of the SmartNode. Use the included black Ethernet cable and RJ45 to DB-9  adapter 

for this purpose (Model 16F-561).

 

Figure 2. Connecting to the PC

 

2.

 

Open a Terminal connection to the SmartNode. Use the Terminal program included with most PC operat-
ing systems (e.g. Hyper Terminal on Windows). The CD-ROM also includes some recommended termi-
nal programs. 

 

Table 1. Factory default IP address and network mask configuration

 

Item

IP Addresss(es)

Network Mask

 

WAN interface Ethernet 0 (ETH 0/0)

DHCP

DHCP

LAN interface Ethernet 1 (ETH 0/1)

192.168.1.1

255.255.255.0

DHCP server address range

192.168.1.10-192.168.1.19

255.255.255.0

100-240V
(50-60 Hz)

1 AMP

UNIT EQUIPPED WITH DUAL SUPPLIES

DISCONNECT BOTH SUPPLIES

BEFORE SERVICING

UNIT EQUIPPED WITH DUAL SUPPLIES

DISCONNECT BOTH SUPPLIES

BEFORE SERVICING

100-240V
(50-60 Hz)

1 AMP

ETH 0/0

NIC ADDRESS

00:A0:BA:00:04:10

Console

Telco Ports

50

1

Reset

Expansion

ETH 0/1

Status

Activity

Console port

Laptop PC

Model 16F-561

adapter and cable

VoIPon   www.voipon.co.uk   [email protected]   Tel: +44 (0)1245 808195   Fax: +44 (0)1245 808299 

Содержание SmartNode 4900









Отзывы: