Configuring your SN4120
30
SmartNode 4120 User Manual
4 • SmartNode initial configuration
Figure 7. Ethernet Configuration page
The SN4120 supports two configuration options for the Ethernet connection (see
figure 7
), as described in the
following paragraphs:
•
DHCP (client—factory default).
The SN4120’s WAN port has a DHCP client enabled that uses an
established Internet connection to get the Internet connectivity parameters (IP address, default gateway)
automatically from a DHCP server. Use this option when connecting the SN4120 to a DSL router, a cable
modem, or to a company LAN (with a DHCP server). This is the factory default configuration so no con-
figuration is required, only the LAN and WAN Ethernet connections should be made to access the Internet
immediately.
•
User
Defined Address.
The SN4120 uses an existing internet connection which does not provide an
upstream DHCP server. In this case, you need to set the IP address, subnet mask, default gateway and
DNS servers manually.
-
IP Address
—The IP address of the WAN Ethernet port.
-
IP Mask—
The mask for the WAN port’s IP address.
Click the
Apply
icon to activate the new configuration.
Содержание Smart Node 4120
Страница 18: ...18 Chapter 2 SN4120 Applications overview Chapter contents Typical application 19...
Страница 42: ...42 Appendix C Cabling Chapter contents Introduction 43 Ethernet 43 ISDN BRI 44...
Страница 45: ...45 Appendix D Port pin outs Chapter contents Ethernet 46 ISDN BRI TE User port 46...
Страница 47: ...47 Appendix E SN4120 factory configuration Chapter contents Introduction 48...
