background image

Warranty Service and Returned Merchandise Authorizations (RMAs)

45

3088/I Getting Started Guide 

8 • Contacting Patton for assistance

Out-of-warranty service

Patton services what we sell, no matter how you acquired it, including malfunctioning products that are no 
longer under warranty. Our products have a flat fee for repairs. Units damaged by lightning or other catastro-
phes may require replacement.

Returns for credit

Customer satisfaction is important to us, therefore any product may be returned with authorization within 30 
days from the shipment date for a full credit of the purchase price. If you have ordered the wrong equipment or 
you are dissatisfied in any way, please contact us to request an RMA number to accept your return. Patton is 
not responsible for equipment returned without a Return Authorization.

Return for credit policy 

Less than 30 days: No Charge. Your credit will be issued upon receipt and inspection of the equipment. 

30 to 60 days: We will add a 20% restocking charge (crediting your account with 80% of the purchase price). 

Over 60 days: Products will be accepted for repairs only. 

RMA numbers

RMA numbers are required for all product returns. You can obtain an RMA by doing one of the following: 

Completing a request on the RMA Request page in the 

Support

 section at 

www.patton.com

By calling 

+1 (301) 975-1007 

and speaking to a Technical Support Engineer

By sending an e-mail to 

[email protected]

All returned units must have the RMA number clearly visible on the outside of the shipping container. Please use 
the original packing material that the device came in or pack the unit securely to avoid damage during shipping.

Shipping instructions

The RMA number should be clearly visible on the address label. Our shipping address is as follows:

Patton Electronics Company

RMA#: xxxx
7622 Rickenbacker Dr.
Gaithersburg, MD 20879-4773 USA

Patton will ship the equipment back to you in the same manner you ship it to us. Patton will pay the return 
shipping costs.

Содержание RocketLink-G






























































Отзывы: