Patton FiberPlex 1004E, Руководство пользователя, Страница: 17 / 39

FiberPlex 1004E Front 17
FiberPlex FP1004E User Manual 1 • General information
Table 1. Front panel ports, LEDs, and switches
# Item Description
1 Link LED (x4) This LED, for each position, indicates port link status as follows:
• On —Link is OK
• Off —No link present
• Blinking —Data is being received or transmitted
2 Ethernet Cable
Port (x4) These jacks are unshielded twisted pair (UTP) RJ-45 cable connection
points for Cat 5 capability.
3 Speed LED (x4) This LED, for each position, indicates port speed status as follows:
• 3 Blinks Repeating —1000M speed
• 2 Blinks Repeating —100M speed
• 1 Blink Repeating —10M speed
4 VLAN/Switch
switch When the toggle is set up to VLAN, it puts the FP1004E in VLAN mode.
Each port is set to 100Base-TX and isolated. This feature expects the
FP1004E to be used in pairs. Ethernet port 1 on FP1004E will only con-
nect to port 1 of another FP1004E.
When the toggle is set down to Switch, it puts the FP1004E in standard
switch mode..
5 Reset switch The Reset switch toggle must be pressed upwards for one second after
changing the VLAN/Switch switch setting from VLAN to Switch or Switch
to VLAN .
6 SFP Slot 6
This is a standard MSA-compliant SFP module slot. (See section
“Insert-
ing and Removing SFP Modules”
on page 24.) This port operates only at
1000Base-X rates. Do not connect ports 5 and 6 of one unit to SFP
ports 5 and 6 of a second unit because this will cause a switching
loop and the units will not operate properly.
7 SFP Slot 5
This is a standard MSA-compliant SFP module slot. (See section
“Insert-
ing and Removing SFP Modules”
on page 24.) This port operates only at
1000Base-X rates. Do not connect ports 5 and 6 of one unit to SFP
ports 5 and 6 of a second unit because this will cause a switching
loop and the units will not operate properly.
8 PWR (power) LED When lit, indicates that the FP1004E is powered on.
9 FX6 LED This LED indicates status of SFP slot 6 as follows:
• ON —Fiber link is OK
• OFF —Fiber link has failed
• Blinking —Activity
10 FX5 LED This LED indicates status of SFP slot 5 as follows:
• ON —Fiber link is OK
• OFF —Fiber link has failed
• Blinking —Activity