15
3.5 CONNECTING POWER
An external AC or DC power supply is available separately. This connec-
tion is made via the barrel jack on the rear panel of the CopperLink
Ethernet Extender. No configuration is necessary for the power supply
(See Appendix B for domestic and international power supply and cord
options).
DC power (supplied via the power supply jack to the CopperLink Ether-
net Extender) must meet the following requirements; DC power supplied
must be reg5VDC ±5%, 1.0A minimum. Center pin is +5V. The
barrel type plug has a 2.5/5.5/10mm I.D./O.D./Shaft Length dimensions.
The CopperLink Ethernet Extender does not have a power switch, so it
powers up as soon as it is plugged in.
• Do not connect power to the DC Mains at this time.
• There are no user-serviceable parts in the power supply sec
tion of the CopperLink Ethernet Extender. Contact Patton Elec-
tronics Technical support at (301)975-1007, via our web site
at http://www.patton.com, or by e-mail at support@pat-
ton.com, for more information.
WARNING
