16
CopperLink 1300 Quick Start Guide
-
Service Mode
: Configures the number of pairs (wires) you want to use. The
CL1300 will default to the maximum number of wires available on your version of
the CopperLink. CL1314 (2-wire) or CL1324 (4-wire).
-
Annex
: Consult technical support before changing this setting.
-
Line Rate Configuration
: This will increase the potential line rate of the CL1300.
Your CopperLink 1300 is defaulted to automatically select the optimal rate based
on the distance (adaptive).
Note
There are two modes: Normal (TCPAM16|32) and Extended (TCPAM64|128).
Selecting the Extended mode will double the bandwidth, but will reduce the
reach (distance) in half. Default is normal.
On the bottom right corner of the CL1300 Basic Configuration wizard page to preview
configurations and reboot.
on page 16 depicts is what you can expect to see
if you click on the preview tab.
Figure 16.
Configure Preview Option
When the user chooses the save and reboot option a prompt will ask you to confirm. If
the configuration is correct, select
Yes
as shown in
