Patton CopperLink CL1211E, Руководство пользователя

Страница: 33 / 48

Introduction 33
CopperLink CL1211E/CL1212E User Manual 4 • Operation
Introduction
Once the CL1200Es are properly installed, they should operate transparently. No user settings are required.
This section describes reading the LED status monitors.
Before applying power to the CL1200E, please review “Connecting Power” on page 26 to verify that the unit is
connected to the appropriate power source.
Front Panel LED Status Monitors
The CL1200E features six front panel LEDs that monitor power, the Ethernet signals, the Line connection,
and the remote/local setting.
Figure 17 shows the front panel location of each LED. Table 5 on page 33
describes the LED functions.
Figure 17. CL1212E front panel
Table 5. Front panel LED description
LED Status Description
Pwr (Power) Green The device is powered on.
Off The device is powered off.
Line Green The port is connected.
Blinking Green Data transceiving.
Off No valid link on this port.
Eth (Ethernet)
0 and Eth 1 Green The port is connected.
a
Blinking Green
a. Once the unit connects to a power source, the LED will
blink as the CL1200E automatically looks for the other
unit in the pair.
Data transceiving.
L (Local) Green The device acts in Local mode.
Off Local mode is off.
R (Remote) Green The device acts in Remote mode.
Off Remote mode is off.