Patton CopperLink CL1211E, Руководство пользователя

Страница: 21 / 48

Installing accessories 21
CopperLink CL1211E/CL1212E User Manual 2 • Installation
Figure 8. Installing the Rackmount DIN rail onto the rack
2.
Refer to section “Installing the DIN Rail Installation Kit; 35MM (INS/A-DIN-35)” on page 17, and per-
form steps 1 through 5 to install the CL1200E onto the rail.
The CL1200E has been installed on the rack; proceed to section “Connecting the Line Interface” on page 23.
Installing the Mounting Ears Installation Kit (INS-KIT-MNTEARS)
Do the following to install the mounting ears installation kit:
1.
Using a cross-tip screwdriver, remove the four screws from the rear panel of the CL1200E as shown in
(
figure 3 on page 18).