Patton 3086FR Скачать руководство пользователя страница 149

Страница: 149 / 170

Warranty Service and Returned Merchandise Authorizations (RMAs)

149

Model 3086FR ATM IAD User Guide

14 • Contacting Patton for assistance

Return for credit policy

•

Less than 30 days: No Charge. Your credit will be issued upon receipt and inspection of the equipment.

•

30 to 60 days: We will add a 20% restocking charge (crediting your account with 80% of the purchase
price).

•

Over 60 days: Products will be accepted for repairs only.

RMA numbers

RMA numbers are required for all product returns. You can obtain an RMA by doing one of the following:

•

Completing a request on the RMA Request page in the Support section at

www.patton.com

•

By calling

+1 (301) 975-1000

and speaking to a Technical Support Engineer

•

By sending an e-mail to

[email protected]

All returned units must have the RMA number clearly visible on the outside of the shipping container. Please
use the original packing material that the device came in or pack the unit securely to avoid damage during
shipping.

Shipping instructions

The RMA number should be clearly visible on the address label. Our shipping address is as follows:

Patton Electronics Company

RMA#: xxxx
7622 Rickenbacker Dr.
Gaithersburg, MD 20879-4773 USA

Patton will ship the equipment back to you in the same manner you ship it to us. Patton will pay the return
shipping costs.

Содержание 3086FR











































































































































































Результаты поиска

Содержание 3086FR

Отзывы:

Patton 3086FR, Руководство пользователя, Страница: 149 / 170

Результаты поиска

Содержание 3086FR

Отзывы: