8
Model 3034/3038 Quick Start Guide
4.0 Connecting the Composite port
4.1 Models with an X.21 port
1.
Plug the X.21 WAN cable’s DB-15 male end into the DB-15 connector (labeled
Composite
)
on the 3034/
3038.
2.
Plug the other end of the cable into the X.21 device.
4.2 Models with a V.35 port
1.
Plug the V.35 WAN cable’s DB-25 end into the units’s
Composite
connector.
2.
Plug the other end of the cable into the V.35 device.
4.3 Models with a T1/E1 port and BNC Connectors
Connecting to the T1/E1 RJ-48C port
1.
Obtain a twisted-pair cable with an RJ-48C plug connector at each end.
2.
Plug one end of the cable into the RJ-48C port on the unit.
3.
Plug the other end of the cable into the T1/E1 device.
Connecting to the dual BNC connectors
1.
Obtain a coaxial cable with a BNC connector at each end.
2.
Plug one end of the cable into the transmit socket (labeled
TX
)
on the unit. Plug the other end of the
cable into the receive port of the E1 device.
3.
Plug one end of the cable into the receive socket (labeled
RX
)
on the unit. Plug the other end of the cable
into the transmit port of the E1 device.
5.0 Additional information
For detailed information about configuring and operating guidance, set up procedures and troubleshooting,
refer to the
Model 3034/3038 User Manual–
available online at
www.patton.com/manuals/3038.pdf
–
and the
TrinityAE Administrator’s Reference Guide,
available online at
www.patton.com/manuals/Trin-
ity-arg.pdf
.
