12
SmartNode 5200 Getting Started Guide
About this guide
General observations
•
Clean the case with a soft slightly moist anti-static cloth
•
Place the unit on a flat surface and ensure free air circulation
•
Avoid exposing the unit to direct sunlight and other heat sources
•
Protect the unit from moisture, vapors, and corrosive liquids
Electrostatic Discharge (ESD) can damage equipment and impair electrical cir-
cuitry. It occurs when electronic printed circuit cards are improperly handled
and can result in complete or intermittent failures. Do the following to prevent
ESD:
•
Always follow ESD prevention procedures when removing and replacing
cards.
•
Wear an ESD-preventive wrist strap, ensuring that it makes good skin con-
tact. Connect the clip to an unpainted surface of the chassis frame to safely
channel unwanted ESD voltages to ground.
•
To properly guard against ESD damage and shocks, the wrist strap and cord
must operate effectively. If no wrist strap is available, ground yourself by
touching the metal part of the chassis.
Содержание SmartNode 5200
Страница 18: ...18 Chapter 2 Applications overview Chapter contents Introduction 19 Typical application 19...
Страница 39: ...39 Appendix C Cabling Chapter contents Introduction 40 Ethernet 40...
Страница 41: ...41 Appendix D Port pin outs Chapter contents Introduction 42 Ethernet 42...
Страница 43: ...43 Appendix E SmartNode 5200 factory configuration Chapter contents Introduction 44...