SmartNode 4650 overview
19
SmartNode 4650 Getting Started Guide
1 • General information
SmartNode 4650 front panel
Figure 3
shows SmartNode 4650 LEDs, the LED definitions are listed in
table 3
.
Table 3. SmartNode 4650 LED definitions
LED
Description
Note
If an error occurs, all LEDs will flash once per second.
Power
When lit, indicates power is applied.
Run
When lit, the unit is in normal operation. Flashes once per second during
boot (startup).
VoIP Link
•
On indicates the gateway is registered to an H.323 gatekeeper/SIP server, or,
in the case of direct routing, has at least one active VoIP connection.
•
Off indicates the unit is not configured or registered, or has no active direct-
routed VoIP connection.
•
Flashing green indicates that the unit is attempting to register or has failed
to register.
BRI Link/Sig
On when L1 and L2 are active. Flash to follow signaling activity on D-Channel.
BRI B1/B2
Off indicates no active calls. Blinking when one or two B-channels are connected.
Ethernet Link
•
On when the Ethernet connection on the corresponding port has a
link indication.
•
Flashes when data is received or transmitted at the corresponding Ethernet port.
Ethernet 100M
•
On when the Ethernet is connected to a 100Mb network
•
Off when the Ethernet is connected to a 10Mb network.
