Introduction
46
SN4554 Getting Started Guide
C • Cabling
Introduction
This section provides information on the cables used to connect the SN4554 and the interface cards to the
existing network infrastructure and to third party products.
Ethernet
Ethernet devices (10Base-T/100Base-T) are connected to the SN4554 over a cable with RJ-45 plugs. All
Ethernet ports on the SN4554 are Auto-MDX and use any straight or crossover cable to connect to hubs,
switches, PCs or other devices.
Figure 14. Typical Ethernet straight-through cable diagram
The interconnecting cables shall be acceptable for external use and shall be
rated for the proper application with respect to voltage, current, anticipated
temperature, flammability, and mechanical serviceability.
LAN
ISDN 2
ISDN 1
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299