Patton electronics SmartNode 4400, Руководство по началу работы

Страница: 19 / 71

SmartNode 4400 Series detailed description 19
SmartNode 4400 Series Getting Started Guide 1 • General information
SmartNode 4400 Series rear panels
The SmartNode 4400 rear panel ports are shown in figure 3 and described in table 3 on page 19.
Figure 3. SmartNode 4400 rear panels
Table 3. Port descriptions
Port Description
ETH 0/0 (WAN Ethernet 0/0 port) 10/100Base-Tx full-/half-duplex, RJ-45, auto detection and auto-
MDI-X connects the unit to an Ethernet WAN device (for example,
a cable modem, DSL modem, or fiber modem).
ETH 0/1 (LAN Ethernet 0/1 port) 10/100Base-Tx full-/half-duplex, RJ-45, auto detection and fall-
back, connects the unit to an Ethernet LAN.
Console (RS-232 control port) Used for service and maintenance, the Console port, an RS-232
RJ-45 connector with EIA-561 pinout, connects the router to a
serial terminal such as a PC or ASCII terminal (also called a dumb
terminal). Asynchronous default data rate 9600 bps, hardware
DSR and DTR signals for external modems are wired directly
together internally
FXS Ports (4400/JS models) For connection of up to 32 analog FXS devices (selectable for 12,
16, 24, or 32). Either a 50-pin or 64-pin RJ21X connector that
connects the router to an analog terminal (a telephone, for exam-
ple) FXO port. EuroPOTS support (ETSI EG201 188).
Model SN4432
44xx/JS/UI
10
0-24
0V
(5
0-6
0 H
z)
1 A
M P
UN
IT EQ
UI
PP ED
W
ITH D
UA L S
UP
PL
IE S
DI
SC ON
NE
CT
B OT
H SU
PP
LIE S
BE
FO RE
S ER
VI
CI NG
ETH
0/0
Co
nsole
Te
lco
Po
rts
50
Rese
t
ETH
0/1
44xx/JS/48
Ethernet ports
Console port
Telco ports
36-72V
1.6 AMP
100-240V
(50-60 Hz)
1 AMP
Telco Ports
100-240V
(50-60 Hz)
1 AMP
Console Reset Console Reset ETH 0/0 ETH 0/1 ETH 0/0 ETH 0/1
Telco Ports Console Reset Console Reset ETH 0/0 ETH 0/1 ETH 0/0 ETH 0/1