Patton electronics SmartNode 4130, Руководство пользователя

Страница: 16 / 53

SmartNode 4130 Overview 16
SmartNode 4130 User Manual 1 • General information
SmartNode 4130 Rear Panel
The SmartNode 4130 is a compact ISDN VoIP gateway that supports eight VoIP or Fax calls, by using either
G.711, G.722, T.38 or any other codec as indicated on the Datasheet. The SmartNode 4130 rear panel ports
are described in
table 2 .
Figure 2. SN4130 Rear Panel
Ports descriptions
The SmartNode 4130 Series rear panel ports are described in table 2 .
Table 2. Rear panel ports
Port Description
ETH 0/0 Auto-MDX Fast/Gigabit-Ethernet port, RJ45 (see figure 2 ), connects the
unit to an Ethernet WAN device (for example, a cable modem, DSL
modem, or fiber modem).
USB 2.0 USB 2.0 host port (see figure 2 ) to connect a USB 3G/4G Cellular
Modem. A list of supported USB Models can be found in the release
notes and in the Software Configuration Guide
BRI 0/0 - BRI 0/3 ISDN BRI TE/NT port, RJ-45 socket S0/T0 interface (see figure 2 ), con-
nects the SmartNode with an ISDN device over an S/T bus, e.g. a PBX or
an NT.
The port can be switched between TE and NT mode.
The interface is internally terminated with 100 Ohm.
Point-to-point or point-to-multipoint configurable. If the port is in NT
mode, a phantom power supply can be switched on to supply connected
phones with power.