Introduction
76
SmartNode 4520 & 4110 Series User Manual
F • SmartNode 4520 Series factory configuration
Introduction
The factory configuration settings for SmartNode 4520 Series devices are as follows:
#----------------------------------------------------------------#
# #
# 4520 Series #
# Factory configuration file #
# #
#----------------------------------------------------------------#
dns-relay
sntp-client
sntp-client server primary 129.132.2.21 port 123 version 4
system
ic voice 0
low-bitrate-codec g729
profile napt NAPT
profile dhcp-server DHCP
network 192.168.1.0 255.255.255.0
include 1 192.168.1.10 192.168.1.99
lease 2 hours
default-router 1 192.168.1.1
domain-name-server 1 192.168.1.1
context ip router
interface eth0
ipaddress dhcp
use profile napt NAPT
tcp adjust-mss rx mtu
tcp adjust-mss tx mtu
interface eth1
ipaddress 192.168.1.1 255.255.255.0
tcp adjust-mss rx mtu
tcp adjust-mss tx mtu
context ip router
dhcp-server use DHCP
port ethernet 0 0
medium auto
encapsulation ip
bind interface eth0 router
no shutdown
port ethernet 0 1
medium auto
encapsulation ip
bind interface eth1 router
no shutdown
Содержание SMARTNODE 4110 Series
Страница 47: ...47 Chapter 5 LEDs status and monitoring Chapter contents Status LEDs 48...
Страница 73: ...73 Appendix E SmartNode 4110 Series factory configuration Chapter contents Introduction 74...
Страница 75: ...75 Appendix F SmartNode 4520 Series factory configuration Chapter contents Introduction 76...
Страница 77: ...77 Appendix G Installation checklist Chapter contents Introduction 78...