4
3
1.3 INDUSTRY CANADA NOTICE
The Canadian Department of Communications label identifies cer-
tified equipment. This certification means that the equipment meets
certain telecommunications network protective, operational and safety
requirements. The Department does not guarantee the equipment will
operate to the user's satisfaction. Before installing this equipment,
users should ensure that it is permissible to be connected to the facili-
ties of the local telecommunications company. The equipment must
also be installed using an acceptable method of connection. In some
cases, the company’s inside wiring associated with a single line individ-
ual service may be extended by means of a certified connector assem-
bly (telephone extension cord). The customer should be aware that
compliance with the above condition may not prevent degradation of
service in some situations. Repairs to some certified equipment should
be made by an authorized maintenance facility designated by the sup-
plier. Any repairs or alterations made by the user to this equipment, or
equipment malfunctions, may give the telecommunications company
cause to request the user to disconnect the equipment. Users should
ensure for their own protection that the ground connections of the
power utility, telephone lines and internal metallic water pipe system,
are connected together. This protection may be particularly important
in rural areas.
1.4 FCC PART 68 COMPLIANCE STATEMENT
This equipment complies with Part 68 of FCC Rules. Please note the
following:
1.
You are required to request service from the telephone company
before you connnect the CSU to a network. When you request serv-
ice, you must provide the telephone company with the following data.
When you request T1 Service, you must provide the telephone compa-
ny with the Facility Interface Code. Provide the telephone company
with both of the following codes: 04DU9-B (1.544 MB D4 framing for-
mat) and 04DU9-C (1.544 MB ESF format). The telephone company
will select the code it has available. The Service Order Code(s) (SOC):
6.0N. The required Universal Service Order Code (USOC) jack: RJ
48C. The make, model number, and FCC Registration number of the
CSU.
2.
Your telephone company may make changes to its facilities, equip-
ment, operations, or procedures that could affect the proper functioning
of your equipment. The telephone company will notify you in advance
of such changes to give you and opportunity to maintain uninterrupted
telephone service.
3.
If your CSU causes harm to the telephone network, the telephone
company may temporarily discontinue your service. If possible, they
will notify you in advance, but if advance notice is not practical, you will
be notified as soon as possible and will be informed of your right to file
a complaint with the FCC.
4.
If you experience trouble with the CSU, please contact Patton
Electronics, Co. for service or repairs. Repairs should be performed
only by Patton Electronics Co.
5.
You are required to notify the telephone company when you dis-
connect the CSU from the network.
1.5 SERVICE INFORMATION
All warranty and non-warranty repairs must be returned freight
prepaid and insured to Patton Electronics. All returns must have a
Return Materials Authorization number on the outside of the shipping
container. This number may be obtained from Patton Electronics
Technical Support at: tel: (301) 975-1007 email:
[email protected] www: http://www.patton.com.
NOTE: Packages received without an RMA number will not be accept-
ed. Patton Electronics' technical staff is also available to answer any
questions that might arise concerning the installation or use of your
Patton Model 2710RC. Technical Support hours: 8AM to 5PM EST,
Monday through Friday.
1.6 CE NOTICE
The CE symbol on your Patton Electronics equipment indicates
that it is in compliance with the Electromagnetic Compatibility (EMC)
directive and the Low Voltage Directive (LVD) of the European Union
(EU). A Certificate of Compliance is available by contacting Technical
Support.
CAUTION: Users should not attempt to make such connections
themselves, but should contact the appropriate electric inspection
authority, or electrician, as appropriate.
Facility
Interface
Service Network
Service
Code
Code
Connection
1.544 Mbps SF format without line power
04DU9-BN
6.0N
RJ48C
1.544 Mbps SF and B8ZS without line power
04DU9-DN
6.0N
RJ48C
1.544 Mbps ANSI ESF without line power
04DU9-1KN
6.0N
RJ48C
1.544 Mbps ANSI ESF and B8ZS w/o line power
04DU9-1SN
6.0N
RJ48C
