Patton electronics NetLink 1094ARC, Руководство пользователя

Страница: 7 / 21

11 12
Switch S3-7: Reset Software Defaults
Switch S3-7 allows the user to reset the software configured facto-
ry defaults.
S3-7 Factory Test
On Normal operation
Off Reset to factory default configuration
Switch S3-8: Transmit Data (TD) Sampling Point
Switch 3-8 controls the Transmit Data (TD) sampling point.
S3-8 Setting Description
On Normal TD sampled on the falling
edge of the 1094ARC
Transmit
Clock (TC)
Off Invert TD sampled on the rising
edge of the 1094ARC
Transmit
Clock.
3.2 CONFIGURING THE REAR INTERFACE CARD
The Model 1094ARC Series has six interface card options: the
Model 1001RCM12545 (DB-25/RJ-45), the Model 1001RCM13445
(M/34/RJ-45), the Model 1001RCM125TB (DB25/TB), the Model
1001RCM134TB (M/34/TB), the Model 1001RCM11545, and the Model
1001RCM115TB. Each of these options supports one DTE interface
connection and one 2-wire line connection. Figure 4 below illustrates
the six different interface options for the Model 1094ARC Series.
Figure 4. Model 1094ARC Series interface card options
DB-25 F DB-15 F DB-15 F M/34 F DB-25 F
M/34 F
Model
1001RCM12545
Model
1001RCM11545
Model
1001RCM115TB
Model
1001RCM13445
Model
1001RCM134TB
Model
1001RCM125TB
Terminal Block
RJ-45 RJ-45 RJ-45
Terminal Block
Terminal Block
NOTE:
The 1094ARC Series rear cards are specifically
designed to operate with the Model 1094ARC function card and
must not be swapped with other Patton function cards.
NOTE:
Based upon the chosen DTE rate, the Model 1095RC
will automatically select the optimum line rate for distance. This
selection is based on the lowest line rate that will support the
DTE rate.