14
Switch S2-6: Response to RDL Request from DTE
Use switch S2-6 to determine the Model 1082 response to RDL requests
from the local DTE. In the enabled setting, the 1082 responds to RDL
requests from the local DTE by sending an RDL loop request to the
remote Model 1082 (See “Remote Digital Loopback (RDL)” on page 23).
Switch S2-7: Compatability Mode
In some instances, you may need to connect a Model 1082 to a third
party IDSL modem. By enabling S2-7 the 1082 will negotiate and link up
to a non-Patton IDSL Modem. When using two Patton units, set 2-7 to
the default position.
Switch S2-8: Not Assigned
S2-3
Activation
Description
Off
Disabled
Ignore Remote Digital Loopback request from
DTE interface
On
Enabled
Respond to Remote Digital Loopback request
from DTE interface
S2-7
Activation
Setting
Off
Disabled
Default position
On
Enabled
Compatibility Mode
