Overview
38
TrinityAE Administrator’s Reference Guide
6 • Sync Serial Configuration
Overview
This chapter describes how to configure the sync serial interface on the following models:
•
Model 3034/C – V.35 interface
•
Model 3034/D – X.21 interface
•
Model 3038/C – V.35 interface
•
Model 3038/D – X.21 interface
Configuration Overview
When using two 3038s as statistical multiplexers, the sync serial interface (labeled
Composite
on the unit–V.35
or X.21) allows connectivity across a WAN link.
To configure sync serial settings through the WMI,
see the section
“Web Management Interface (WMI)”
on page 38.
To configure sync serial settings through the CLI,
see the section
“Command Line Interface (CLI)”
on page 39.
Web Management Interface (WMI)
To access the statistical multiplexer main page, click on
Interface Configuration > Sync Serial
from the menu
on the left of the screen.
Figure 14. Sync Serial Device Management page
The
Sync Serial Device Management
main page displays the current state of the sync serial port (V.35 or
X.21). You can also select to invert the clock signal and enable/disable the port. Click
Submit
to save your set-
tings.
Содержание Multiport Asynchronous Statistical Multiplexer...
Страница 19: ...19 Chapter 2 Applications overview Chapter contents Typical Model 3034 3038 Application 20...
Страница 49: ...49 Appendix C Cabling Chapter contents Introduction 50 Console 50 Ethernet 51...
Страница 55: ...X 21 DB 15 connector 55 Model 3034 3038 Getting Started Guide D Port pin outs X 21 DB 15 connector T1 E1 RS 232...
