3
1.3 RADIO AND TV INTERFERENCE
The Model 2711 Series generates and uses radio frequency ener-
gy, and if not installed and used properly—that is, in strict accordance
with the manufacturer's instructions—may cause interference to radio
and television reception. The Model 2711 Series has been tested and
found to comply with the limits for a Class A computing device in accor-
dance with the specifications in Subpart J of Part 15 of FCC rules,
which are designed to provide reasonable protection from such inter-
ference in a commercial installation. However, there is no guarantee
that interference will not occur in a particular installation. If the Model
2711 Series does cause interference to radio or television reception,
which can be determined by disconnecting the cables, the user is
encouraged to try to correct the interference by one or more of the fol-
lowing measures: moving the computing equipment away from the
receiver, re-orienting the receiving antenna, and/or plugging the receiv-
ing equipment into a different AC outlet (such that the computing
equipment and receiver are on different branches).
1.4 FCC INFORMATION
The Model 2711 Series has been tested and registered in compli-
ance with the specifications in Part 68 of the FCC rules. A label on the
equipment bears the FCC registration number. You may be requested
to provide this information to your telephone company.
Your telephone company may make changes in its facilities, equip-
ment, operations or procedures that could affect the proper operation
of the Model 2711 Series. If this happens, the telephone company
should give you advance notice to prevent the interruption of your serv-
ice.
The telephone company may decide to temporarily discontinue
your service if they believe your Model 2711 Series may cause harm to
the telephone network. Whenever possible, they will contact you in
advance. If you elect to do so, you have the right to file a complaint
with the FCC.
If you have any trouble operating the Model 2711 Series, please
contact Patton Technical Support at (301) 975-1000. The telephone
company may ask you to disconnect the equipment from the telephone
network until the problem has been corrected or until you are certain
that the Model 2711 Series is not malfunctioning.
The following information may be required when applying to your
local telephone company for leased line facilities:
Facility
Interface
Service Network
Service
Code
Code
Connection
1.544 Mbps SF format without line power
04DU9-BN
6.0N
RJ48C
1.544 Mbps SF and B8ZS without line power
04DU9-DN
6.0N
RJ48C
1.544 Mbps ANSI ESF without line power
04DU9-1KN
6.0N
RJ48C
1.544 Mbps ANSI ESF and B8ZS w/o line power
04DU9-1SN
6.0N
RJ48C
4
1.4.1 FCC Compliance:
The Model 2711 has been tested and found to comply with the
specifications found in Part 68 of the FCC rules and regulations. A
label on the equipment bears the FCC registration number. You may
be requested to provide this information to your telephone company.
The Telephone Company may decide to temporarily discontinue
your service if they believe that the Model 2711 may cause harm to the
telephone network. Whenever possible the telephone company will
attempt to notify you in advance. You have a right, if you so choose, to
file a complaint with the FCC.
In accordance with FCC rules and regulation CFR 47 68.218(b)(6),
the user must notify the telephone company prior to disconnection.
The Universal Service Order Code (USOC) is RJ48.
The Facility Interface Codes (FIC) are 04DU9-BN, 04DU9-DN, 04DU9-
1KN, and 04DU9-1SN.
The Service Order Code (SOC) is 6.0N
1.5 INDUSTRY CANADA NOTICE :
The Canadian Department of Communications label identifies cer-
tified equipment. This certification means that the equipment meets
certain telecommunications network protective , operational and safety
requirements. The Department does not guarantee the equipment will
operate to the user's satisfaction.
Before installing this equipment, users should ensure that it is per-
missible to be connected to the facilities of the local telecommunica-
tions company. The equipment must also be installed using an accept-
able method of connection. In some cases, the companies inside
wiring associated with a single line individual service may be extended
by means of a certified connector assembly (telephone extension
cord). The customer should be aware that compliance with the above
condition may not prevent degradation of service in some situations.
Repairs to some certified equipment should be made by an
authorized maintenance facility designated by the supplier. Any repairs
or alterations made by the user to this equipment , or equipment mal-
functions, may give the telecommunications company cause to request
the user to disconnect the equipment.
Users should ensure for their own protection that the ground con-
nections of the power utility, telephone lines and internal metallic
water pipe system, are connected together. This protection may be
particularly important in rural areas.
CAUTION: Users should not attempt to make such connections
themselves, but should contact the appropriate electric inspection
authority, or electrician, as appropriate.
