Patton electronics ipRocketLink 3086FR, Руководство пользователя

Страница: 125 / 172

Enabling the Firewall 125
Model 3086FR ATM IAD User Guide 10 • Security
Firewall Policies:
ID | Name | Type 1 | Type 2 | Validator Allow Only
-------------------------------------------------------------------
1 | item0 | external | internal | false
-------------------------------------------------------------------
fi
firewall delete policy item0
The firewall policy named item0 is now deleted.
Enabling the Firewall
At this point, both security and the firewall can be enabled and the network is secure. All the interfaces which
have been defined are protected: all traffic blocked between the internal and external interfaces.
1. Return to the Security page.
2. Under Security State select Enabled for Security and click on Change State .
3. Then select
Enabled for the Firewall
and click on
Change State
.
The network is now secure. All the interfaces which have been defined are protected and all traffic is blocked
between different the different interface types. That is, all traffic is blocked between the external and internal
interfaces.
The next section describes how to configure the Firewall for allowing certain types of data transfer to occur
between the PC’s on different networks.
Firewall Portfilters
Next, we configure the Firewall to permit certain types of data transfer between the PCs on the different net-
works. This is done by the implementation of Firewall portfilters. Portfilters are individual rules that determine
what kind of traffic can pass between two interface types.
For the Transport Type below, the different types are:
Transport Type Abbreviation
1 ICMP
2 IGMP
3 GGP
4 IP
6 TCP
8 EGP
9 IGP
17 UDP
46 RSVP
47 GRE
89 OSPFIGP
92 MTP