CPE Configuration
38
Model 3231 User Manual
4 • Web Interface Configuration
CPE Configuration
This section describes how to configure the CPE unit through the web interface. To get to the CPE Configu-
ration page in the Web GUI, click on
G.SHDSL
>
CPE Configuration
on the left navigation menu.
Note
Use the LCD panel menu to configure basic options. See
“CPE Config”
on
page 21 for information on configuring the CPE through the LCD menu.
Figure 14. Configuring the CPE in the Web GUI
To configure the CPE through the Web GUI:
1.
Click
Get CPE Configuration
.
2.
Wait for the
Configuration State
to reach
Idle
before making configuration changes to the CPE. Other-
wise, your changes will not save.
3.
Select the line rate from the
DSL Data Rate
drop-down menu.
4.
Enter the
IP Address
for the CPE unit.
5.
Enter the
Netmask
for the CPE unit.
6.
Click
Configure CPE
.
