Controls and indicators
21
Model 2285 Getting Started Guide
2 • Getting started
The Factory Reset button on the underside of the Model 2285 (see
figure 1
) is used to restore the device server
to the factory default configuration.
Figure 1.
Factory Reset button location
The Serial Type DIP switches are used to configure the serial communication port (see
figure 2
). (Refer to sec-
tion
“Serial port parameters”
on page 63 and
Appendix
C on page 99 for more detailed information on the
serial communication type and its connection)
Figure 2. Ethernet port, Power port, and DIP switch locations
Factory
Reset
Factory Reset button
Model 2285
EtherBITS Universal Single-Port Device Server
Serial
PWR
Link
Tx
Rx
Console/Data
Power
Ethernet
Serial Type
1
2
3
ON
Ethernet port
Serial Type DIP switches
Power port
