Setup Command Menu
76
Model 2160 Series Getting Started Guide
5 • Console and Telnet configuration
VLAN
Virtual LAN (VLAN) is defined as a group of devices on one or more LANs that are configured so that they
can communicate as if they were attached to the same wire, when in fact they are located on a number of dif-
ferent LAN segments. Because VLAN is based on logical instead of physical connections, it is extremely flexi-
ble.
You can setup the Virtual LAN (VLAN) parameters in VLAN command. The Model 2160 supports VLAN-
to-PVC only for bridge mode operation, i.e., the VLAN spreads over both the CO and CPE sides, where there
is no layer 3 routing involved. The unit supports up to 8 active VLANs with shared VLAN learning (SVL)
bridge out of 4096 possible VLANs specified in IEEE 802.1Q.
The
vlan
command menu lists commands for setting up the line port. Move the cursor “
>>
” to
vlan
in the
setup
menu and press Enter. The following menu displays:
To activate the VLAN function, move the cursor “
>>
“ to
mode
and press Enter. The products support two
types of VLAN:
802.1Q
and
Port-Based
.
802.1Q
defines the operation of VLAN bridges that permit the definition, operation, and administration of
VLAN topologies within a bridged LAN infrastructure.
Port-Based VLANs
are VLANs where the packet for-
warding decision is based on the destination MAC address and its associated port.
Mode
You can choose from two types of VLANs:
802.1Q Tag-Based VLAN
or
Port Based VLAN
. If you are not
going to use the VLAN function, set this option to
Disable
.
-----------------------------------------------------------------------------
Command: setup vlan mode <Disable|8021Q|Port>
Message: Please input the following information.
Trigger VLAN function (TAB Select) <Disable>:
-----------------------------------------------------------------------------
Table 21
shows the options available within the VLAN
mode
command menu:
>>
mode
Trigger virtual LAN function
modify
Modify virtual LAN table
pvid
Modify port default VID
link_mode
Modify port link type
list
Show VLAN configuration
Table 21. VLAN Mode Options
Menu
Options
VLAN Mode
Disable
802.1Q Tag VLAN
Port-Based VLAN