4.0 INSTALLATION
The Model 465 Series requires no AC power or batteries for operation.
After making any neccessary configuration changes (see section 3.0), simply
plug in the modular and coax cables as indicated on the case. The pin
configuration of the 120 Ohm RJ-45 modular connector appears below:
RJ-45 Pin(s)
Function
1 & 2
.......................................................
TX Pair
3
.......................................................
TX Shield
4 & 5
.......................................................
RX Pair
6
.......................................................
RX Shield
5
6
APPENDIX A
PATTON ELECTRONICS 465 SERIES
SPECIFICATIONS
Transmission Line:
ITU/CCITT G.703 (unstructured)
Data Rate:
2.048 Mbps maximum
Unbalanced Coaxial
Connection:
Dual coax 1.6/5.6 mm. connectors, male or
female (RG 59 or 2002 coax)
Nominal Line Impedance = 75 Ohms
Balanced Twisted Pair
Connection:
Single 8-pin, shielded RJ-45 jack
Two twisted-pair
Nominal Line Impedance = 120 Ohms
Power Supply:
None required, passive device
Coaxial Twisted Pair
Isolation:
500V rms
Compliance:
CE approved
Dimensions:
0.8H x 1.7W x 2.7D in.
2.03H x 4.32W x 6.86D cm.
Содержание 465F
Страница 6: ......
