6
3.0 INSTALLATION
This section describes how to connect to the twisted pair interface and
the serial interface. This section also describes procedures to reverse the
cover of the unit in order to mount the 50-pin Telco ports on the front of
the unit.
3.1 REVERSING THE COVER
The cover of the balun rack can be reversed in order to mount the 50-pin
Telco ports on the front of the unit, flush with the mounting ears. To
remove the cover of the unit, remove the four cover screws from each
side of the unit (see Figure 2), lift the cover straight up, and re-attach the
cover with the 50-pin Telco ports on the front of the unit.
Figure 2.
Removing the cover screws
24
19
20
21
22
23
TX
RX
18
Cover screw
(8 places)
