Patton electronics 2190, Руководство пользователя, Страница: 11 / 14

Commands to Change or Read Registers (continued)
AT = ??? Changes the value of the last referenced
register.
??? = new value
AT? Displays the value of the last referenced
register.
ATSn Points to new register.
"n" = number of register to point
ATSn? Displays the contents of the register select
ed with n.
"n" = number of register to point.
4.3.2 REGISTER DESCRIPTION
The Model 2190 uses registers to store configuration status. Some
of the registers control only one function, but some of them are called
bit mapped registers which control several functions in a single regis-
ter. The chart below identifies the codes, function, default, range and
units of the S-registers.
Register Descriptions (continued)
Register value may be stored in one of two user profiles with the
&W command.
S-REGISTERS
CODES FUNCTIONS DEFAULT RANGE UNITS
S0 Rings to Auto-Answer 0 0-255 Ring
S1 Ring Counter 0 0-255 Ring
S2 Escape Character 43 0-255 ASCII
S3 Carriage Return Character 13 0-127 ASCII
S4 Line Feed Character 10 0-127 ASCII
S5 Backspace Character 8 0-255 ASCII
S6 Wait Time for Dial Tone 2 2-255 Sec.
S7 Wait Time for Carrier 50 1-255 Sec.
S8 Pause Time for Dial Delay Modifier 2 0-255 Sec.
S9 Carrier Detect Response Time 6 1-255 .1 Sec.
S10 Carrier Loss Disconnect Time 14 1-255 .1 Sec.
S11 DTMF Tone Duration 95 50-255 .001 Sec.
S12 Escape Prompt Delay 50 0-255 .02 Sec.
S14 Bit Mapped Register 138(8Ah)
S16 Bit Mapped Register 0
S18 Test Timer 0 0-255 Sec.
S21 Bit Mapped Register 52(34h)
S22 Bit Mapped Register 117(75h)
S23 Bit Mapped Register 62(3Dh)
S-REGISTERS
CODES FUNCTIONS DEFAULT RANGE UNITS
S24 Sleep Inactivity Timer 0 0-255 Sec.
S25 Delay to DTR Off 5 0-255 .01 Sec.
S26 RTS to CTS Delay 1 0-255 .01 Sec.
S27 Bit Mapped Register 73(49h)
S28 Bit Mapped Register 0
S29 Flash Dial Modifier Timer 70 0-255 10 ms.
S30 Disconnect Inactivity Timer 0 0-255 10 Sec.
S31 Bit Mapped Register 194(C2h)
S32 XON Character 17(11h) 0-255 ASCII
S33 XOFF Character 19(13h) 0-255 ASCII
S36 LAPM Failure Control 7
S37 Line Connection Speed 0
S38 Delay Before Forced Hang up 20 0-255 Sec.
S39 Bit Mapped Register 3
S40 Bit Mapped Register 104(68h)
S41 Bit Mapped Register 195(C3h)
S46 Data Compression Control 138
S48 V.42 Negotiation Control 7
S82 LAPM Break Control 128(40h)
S86 Call Failure Reason Code 0-255
S91 PSTN Transmit Attenuation Level 10 0-15 dBm
S92 Fax Transmit Attenuation Level 10 0-15 dBm
S95 Result Code Message Control 0
19 20