1 1 3 0 0 1 U A
1-2
O
PERATION
P
ATTON
E
LECTRONICS
C
O
.
1 2 0 5 P
I
NSTALLATION
A
ND
O
PERATIONS
M
ANUAL
Controlling DSR
Data Terminal Ready (DTR) on each port is routed to the Data Set Ready (DSR) pin of the
other port. DSR can be configured to follow the DTR or can be forced to be active all the time.
Power
110 or 220 Volt operation is provided by a convenient switch located on the rear panel of the
1205P (CTS ME-V.35). Simply install the proper fuses (110VAC - .16ASB, 250V or 220VAC
- .8ASB, 250V) and power plug for the country of use and select the proper line voltage and
the unit is ready for operation.
Approvals
Safety approvals for UL & CSA have been granted allowing the Modem Eliminator. FCC Part
15 class A emissions approvals insure the Modem Eliminator will not interfere with any of the
other equipment in your data center. The Model 1205P Serieshas been tested and found to
comply with the limits for a Class A computing device in accordance with the specifications in
Subpart J of Part 15 of FCC rules, which are designed to provide reasonable protection from
such interference in a commercial installation.
CE NOTICE: The CE symbol on your Patton Electronics equipment indicates that it is in
compliance with the Electromagnetic Compatibility (EMC) directive and the Low Voltage
Directive (LVD) of the Union European (EU). A Certificate of Compliance is available by
contacting Technical Support.
Available Options
1205P is available in both stand-alone subset or rack-mountable versions (1205PRC).
Various configurations of the interface are also available from the factory. The 1205PRC fits
into the Model 1010R16 16 Card Rack Assembly.
