112001UA
i
I
NSTALLATION
A
ND
O
PERATIONS
M
ANUAL
Patton Electronics Co.
1200P
PROPRIETARY NOTICE
The information contained herein is proprietary and confidential to Patton
Electronics Co. Any reproduction or
redistribution of this publication, in whole or in part, is expressly prohibited unless written authorization is given
by Patton
Electronics Co.
WARRANTY NOTICE
WARRANTIES: Patton
Electronics Co. (hereafter referred to as Patton) warrants that its equipment is free
from any defects in materials and workmanship. The warranty period shall be two years from the date of
shipment of equipment. Patton’s sole obligation under its warranty is limited to the repair or replacement of the
defective equipment, provided it is returned to Patton, transportation prepaid, within a reasonable period. This
warranty will not extend to equipment subjected to accident, misuse, alterations or repair not made by Patton
or authorized by Patton in writing.
PUBLICATION NOTICE
This manual has been compiled and checked for accuracy. The information in this manual does not constitute a
warranty of performance. Patton reserves the right to revise this publication and make changes from time to
time in the content thereof. Patton assumes no liability for losses incurred as a result of out-of-date or
incorrect information contained in this manual.
RADIO AND TV INTERFERENCE
The Patton MSDs generate and use radio frequency energy, and if not installed and used properly—that is, in
strict accordance with the manufacturer’s instructions—may cause interference to radio and television
reception. The Patton MSDs have been tested and found to comply with the limits for Class A computing
devices in accordance with the specifications in Subpart J of Part 15 of FCC rules, which are designed to
provide reasonable protection from such interference in a commercial installation. However, there is no
guarantee that interference will not occur in a particular installation. If the Patton MSDs do cause interference
to radio or television reception, which can be determined by disconnecting the cables, the user is encouraged to
try to correct the interference by one or more of the following measures: moving the computing equipment
away from the receiver, re-orienting the receiving antenna, and/or plugging the receiving equipment into a
different AC outlet (such that the computing equipment and receiver are on different branches).
CE NOTICE
The CE symbol on your Patton Electronics equipment indicates that it is in compliance with the electromagnetic
Compatibility (EMC) directive and the Low Voltage Directive (LVD) of the European Union (EU). A Certificate of
Compliance is available by contacting Technical Support.
SERVICE
All warranty and non-warranty repairs must be returned freight prepaid and insured to Patton Electronics. All
returns must have a Return Materials Authorization number on the outside of the shipping container. This
number may be obtained from Patton Electronics Technical Support at:
tel: (301) 975-1007;
email: [email protected];
or, www: http://www.patton.com.
NOTE: Packages received without an RMA number will not be accepted.
Patton Electronics’ technical staff is also available to answer any questions that might arise concerning the
installation or use of your Patton MSDs. Technical Support hours: 8AM to 5PM EST, Monday through Friday.
Copyright© 2000 Patton Electronics Co., All Rights Reserved
