1.3 SERVICE
All warranty and non-warranty repairs must be returned freight
prepaid and insured to Patton Electronics. All returns must have a
Return Materials Authorization number on the outside of the shipping
container. This number may be obtained from Patton Electronics
Technical Service at:
tel:
(301)975-1007
email:
www:
http://www.patton.com
Patton Electronics' technical staff is also available to answer any
questions that might arise concerning the installation or use of your
Model 1088. Technical Service hours:
8AM to 5PM EST, Monday
through Friday.
3
2
2..0
0 G
GE
EN
NE
ER
RA
AL
L IIN
NF
FO
OR
RM
MA
AT
TIIO
ON
N
Thank you for your purchase of this Patton Electronics product.
This product has been thoroughly inspected and tested and is warrant-
ed for One Year parts and labor. If any questions or problems arise
during installation or use of this product, please do not hesitate to con-
tact Patton Electronics Technical Support at (301) 975-1007.
2.1 FEATURES
¥ Multi-Rate Symmetric DSL
¥ Supports DTE Speeds from 64 kbps to 2.048 Mbps
¥ 2-wire Operation
¥ 120 ohm (RJ-45)
and
75 ohm (dual coax) G.703/G.704 termina-
tions
¥ 2Mbps G.703 Clear Channel (Unframed) or nx64 G.704 (Framed)
Operation
¥ SNMP Manageable as the CP (Customer Premises) modem when
connect to Model 1095RC
¥ Selectable AMI or HDB3 Line Coding
¥ LED indicators for DSL Link, E1/FE1 Link, LOS, TM, ER and NS
2.2 DESCRIPTION
The Patton Electronics
mDSL Rocket
offers the ability to extend
G.703/G.704 service over Multi-rate Symmetric Digital Subscriber Line
technology. Multi-rate DSL offers the ability to deliver the maximum bit
rate that a twisted pair line can accommodate. Now, ISPs, CLECs and
corporate enterprises can terminate G.703/G.704 (E1) service and
either extend nx64 G.703/G.704 service
or
provide a remote serial
connection to a router or switch when paired with Model 1088/C (V.35)
or 1088/D (X.21).
As Model 1088/K receives data from E1 line, it extracts the E1
clock, and delivers smooth clock and data to the remote DSL modem
over a two-wire DSL span. In a
network extension
application, a
remote 1088/K delivers nx64kbps to 2 Mbps G.703 data and clocking
to device with an E1 interface. In a
network termination
application,
a remote Model 1088/C or 1088/D accepts this data and clock stream
and provides nx64kbps data to CPE with a V.35, or X.21 interface.
As a symmetric DSL NTU, Model 1088/K offers the same data
rates in both directions over a single pair of regular telephone lines
using Carrierless Amplitude and Phase (CAP) modulation. Equipped
with both 75 ohm (dual coax) and 120 ohm (RJ-45), the Model 1088/K
is easy to configure and install. DSL line connection is via RJ-45 jack.
Standard versions of Model 1088 are powered by a 100/230VAC
(Universal) supply. A DC power supply option supports any DC input
between 36-72VDC.
4
IMPORTANT:
The Model 1088 is equipped with flash
upgrade. Please refer to Patton website, or contact Technical
Support for the latest version of the software.
NOTE:
Packages received without an RMA number will not be
accepted.
