Pattfield PE-AHS 20 Li, Оригинальное руководство пользователя

Страница: 81 / 82

EN 160 EN 161
Technical Data
20 V BATTERY HEDGE TRIMMER PE-AHS 20 Li
Nominal voltage 20 V
No-load speed (n
0
) 2200/min
Cutting length 510 mm
Maximum branch thickness 16 mm
Weight 2.28 kg
Sound pressure level (L
pA
) 67.3 dB(A) / Uncertainty K = 3 dB(A)
Measured sound power level (L
WA
) 82.7 dB(A) / Uncertainty K = 2.11 dB(A)
Max. vibration emission (a
hw
) ≤ 2.5 m/s² / Uncertainty K = 1.5 m/s²
SUITABLE BATTERIES PE-AK2, PE-AK4 (not included)
Voltage 20 V
Capacity PE-AK2 (6801240): 2.0 Ah Li-ion battery
PE-AK4 (6801241): 4.0 Ah Li-ion battery
SUITABLE CHARGER PE1H (not included)
Nominal voltage 100-240 V ~ 50/60 Hz, 78 W
Output voltage 14.4-20 V , 3.0 A
Charging time 60 min for PE-AK2
120 min for PE-AK4
Operation temperature 10-40 °C
Protection Class / II
Weight 0.25 kg
Disposal
Troubleshooting
Caution! Make sure the appliance is switched off and the battery is removed. Always
wear protective gloves.
Problem Possible cause Solution
Motor does not run The battery is empty. Charge the battery.
Battery does not charge Battery is not properly in-
serted into the charger.
Insert the battery into the charger
correctly.
Plug or fuse are faulty. Check plug and fuse.
Hedge trimmer does
not cut properly
Blades are blunt or damaged. Contact your customer service for
repair. Repairs may be carried out
by an authorised customer service
centre only.
If the device still does not work, please contact your local HORNBACH store or write an email
to: service@hornbach.com
The crossed-out wheeled bin logo
requires the separate collection of
waste electric and electronic equip-
ment (WEEE). Such equipment may
contain dangerous and hazardous substanc-
es. These tools must be returned to a desig-
nated collection point for the recycling of
WEEE and must not be disposed as unsorted
municipal waste. By doing so, you will help to
conserve resources and protect the environ-
ment. Contact your local authorities for more
information.
Children must not play with plastic bags and
packaging material, due to possible injury or
danger of suffocation. Store such material
safely or dispose of environmentally friendly.
Remove battery before disposal of the
unit and correctly dispose of them.
Used batteries must be disposed of
properly. Battery selling stores and municipal
collection points offer special containers for
battery disposal.
The values given in these instructions have
been measured in accordance with a stand-
ardized measurement procedure and can be
used to compare appliances. It may be used
for a preliminary assessment of exposure.
Warning! The vibration emission
during actual use can differ from the
declared total value depending on the use
of the machine.
Try to keep the stress due to vibration as
low as possible. Reduce vibration stress for
instance by wearing gloves when using the
tool and limiting the work time. All phases of
the operating cycle must be considered (e.g.
standby time and no-load run).
Noise & Vibration