GB
III- SAFETY INSTRUCTIONS
GB
119
120
WARNING!
Read all instructions. Failure to follow all
instructions listed below may result in electric
shock, fire and/or serious injury. The term
“power tool” in all warnings listed below
refers to your mains operated power tool.
1. Read the instruction carefully.
Be
familiar with the controls and the proper
use of the appliance. Read and
understand the operator’s manual and
observe the warnings and instruction
labels affixed to the appliance.
2. Users.
Never allow children or people
unfamiliar with these instructions to use
the appliance. Local regulations may
restrict the age of operator. Never operate
the tool under the influence of alcohol,
medication or drugs.
3. Use appropriate tool.
This device is only
intended for cutting grass and soft
vegetation outdoors and only designated
for use on private property. Do not force
small tools or attachments to do the job of
a heavy duty tool.
4. Keep work areas clean.
Cluttered areas
can cause accidents.
5. Consider work area environment.
Do not
expose your tool to high humidity or rain.
Do not use your tool in damp and wet
conditions. Keep the work area well lit. Do
not use your tool where there is a risk of
causing fire or explosion, e.g. in the
presence of flammable liquids and gases.
6. Keep all bystanders, children, and
pets away.
The operator or user is
responsible for accidents or hazards
occurring to other people or the
property.
7. Dress appropriately.
Do not wear
loose clothing or jewelry, as these can
be caught in moving parts. Preferably
wear non-slip footwear when working
outdoors. Wear protective hair covering
to keep long hair out of the way.
8. Head protection.
Always use safety
glasses and gloves. Use a face or dust
mask whenever the operations may
produce dust or flying particles. Wear
ear protection whenever the sound level
seems uncomfortable.
9. Do not overreach.
Keep proper footing
and balance at all times.
10.Stay alert, watch what you are doing.
Use common sense when operating the
appliance. Do not operate the tool when
you are tired.
11.Grip the tool securely.
Operator
should one hand on the main handle,
the other on the front handle. Keep
finger off trigger until ready to use.
12.Remove adjusting keys and
wrenches.
Always check that adjusting
keys and wrenches are removed from
the tool before operating the tool.
13.Risk of cut.
Do not touch or try to stop
the cutting lines when they are moving.
15.Check for damaged parts.
Before
further use, carefully check the tool for
damage. Check for alignment of moving
parts, binding of moving parts, breakage
of parts, mounting and any other
condition that may affect its operation.
Do not use the tool if any parts are
damaged or defective. Have any
damaged or defective parts repaired or
replaced by an authorized service agent.
Never attempt any repairs yourself.
16.Avoid unintentional starting.
Do not
carry the tool without disconnect the
plug and be sure the tool is switched off.
17.Use an extension cord suitable for
outdoor use when operating a power
tool outdoors.
Use a cord suitable for
outdoor use reduces the risk of electric
shocks.
18.If operating a power tool in a damp
location is unavoidable ,use a
residual current device(RCD)
protected supply.
Use of an RCD
reduces the risk of electric shock.
19.Store idle tools.
When not in use, tools
should be stored in a dry, locked-up
place out of reach of children.
20.Maintain tools with care.
Keep tools
clean and in good condition for better
and safer performance. Follow the
instructions for maintenance and
changing accessories. Keep handles
and switches dry, clean and free from oil
and grease.
21.Have your tool repaired by an
authorized service agent.
This tool is
manufactured in accordance with the
relevant safety regulations. To avoid
danger, electrical appliances must only be
repaired by qualified technicians.
Warning!
Do not use any attachments or accessories
not recommended by the manufacturer of this
tool. The use of attachments or accessories
not recommended can result in serious
personal injury.
ADDITIONAL SAFETY WARNINGS
FOR YOUR LINE TRIMMR
a) Wear protective glasses or goggles;
b) Never allow children or people
unfamiliar with the instructions to use
the machine;
c) Stop using the machine while people,
especially children, or pets are nearby;
d) Only use the machine in daylight or
good artificial light;
e) Before using the machine and after any
impact, check for signs of wear or
damage and repair as necessary;
f) Never operate the machine with
damaged guards or without the guards
in place;
g) Keep hands and feet away from the
cutting means at all times and
especially;
h) Take care against injury form any
device fitted for trimming the filament
line length. After extending new cutter
line always return the machine to its
normal operating position before
switching on;
