EN
140
1
1
1
2
2.
2
1
2
2
1.
2.
3.
To release the battery, press the bat-
tery release switch
5
and slide off the
battery.
2
FIT DRILL
Slide back the locking sleeve
1
.
Warning!
Before inserting drills,
lock the rotary hammer by centering
the rotation direction switch.
1
Fit the SDS drill into the chuck with a
twisting motion. Release locking sleeve
again. Make sure that the drill is fully
inserted.
2
ATTACH BATTERY (NOT INCLUDED)
Slide the battery
6
onto the rotary ham-
mer until it clicks into place.
Caution! Only use the provided bat-
tery with the rotary hammer.
1
DRILL FUNCTION
(1.) Press and hold the locking button
10
and (2.) turn the switch
3
to drill-
ing position when drilling into wood,
metal or plastic.
Warning!
Make sure the tool is
switched off.
1
HAMMER DRILL FUNCTION
(1.) Press and hold the locking button
10
and (2.) turn the switch
3
to hammer
drilling position when drilling into
concrete or masonry.
2
ROTATION DIRECTION
To drive in screws or drill, set the rota-
tion direction switch
9
to
.
Caution! Wait until the chuck has
stopped rotating before changing
the rotation direction.
1
To loosen screws, set the rotation di-
rection switch
9
to
.
2
REMOVE DRILL
To remove the drill, (1.) slide back the
locking sleeve
1
and (2.) pull out the
drill.
Warning!
Before changing drills,
lock the rotary hammer by centering
the rotation direction switch.
3
2.
1.
1.
2.
1.
3
2.
1.
