EN
104
EN
105
CONNECT POWER CORD
Plug the power cord
7
into a suitable
wall socket.
1
Using the tool
1.
Fit the required impact socket to the
square drive tool holder
1
.
2.
Make sure your workpiece can not slip.
3.
Hold the tool firmly and start working by
pressing either the F-trigger
3
or R-trig-
ger
2
, depending to the desired rotation
direction.
4.
To remove the impact socket firmly pull it
from the square drive tool holder
1
.
Intended use
The tool is intended for driving in and loos-
ening screws, bolts and nuts within the re-
spective range of dimension. The tool is not
intended for commercial use.
Any other use or modification to the tool is
considered as improper use and could cause
considerable dangers.
Product overview
1
Square drive tool holder
2
R
-trigger (reverse)
3
F
-trigger (forward)
4
Gear box
5
Motor housing
6
Main handle
7
Power cord
Lieferumfang
Etendue de livraison
Materiale compreso nella fornitura
Leveringsomvang
Leveransomfång
Rozsah dodávky
Rozsah dodávky
Volumul livrat
Scope of delivery
DE
SV
IT
SK
FR
CZ
NL
RO
GB
1x
4x
17 19 21 22
1
1
2
6
7
3
4
5
