background image

GB

- 121 -

 Warranty  certi

fi

 cate

Dear Customer,

All of our products undergo strict quality checks to ensure that they reach you in perfect condition. In the 

unlikely event that your device develops a fault, please contact our service department at the address 

shown on this guarantee card or the sales outlet from where you bought the device. Please note the fol-

lowing terms under which guarantee claims can be made:

1.  These guarantee conditions regulate additional guarantee services. Your statutory guarantee claims 

are not a

 ected by this guarantee. Our guarantee is free of charge to you.

2.  Our guarantee only covers defects su

 ered by the device which have been veri

fi

 ably caused by a 

material or manufacturing fault and is limited to the recti

fi

 cation of such defects or the replacement 

of the device at our discretion. 

Please note that our devices are not designed for use in commercial, trade or professional applica-

tions. A guarantee contract will not be created if the device has been used by commercial, trade or 

industrial business or has been exposed to similar stresses during the guarantee period.

3.  The following are not covered by our guarantee: 

- Damage to the device caused by a failure to follow the assembly instructions or due to incorrect 

installation, a failure to follow the operating instructions (for example connecting it to an incorrect 

mains voltage or current type) or a failure to follow the maintenance and safety instructions or by ex-

posing the device to abnormal environmental conditions or by lack of care and maintenance. 

- Damage to the device caused by abuse or incorrect use (for example overloading the device or the 

use or unapproved tools or accessories), ingress of foreign bodies into the device (such as sand, 

stones or dust, transport damage), the use of force or damage caused by external forces (for ex-

ample by dropping it). 

- Damage to the device or parts of the device caused by normal or natural wear or tear or by normal 

use of the device.

4.  The guarantee is valid for a period of 3 years starting from the purchase date of the device. Guaran-

tee claims should be submitted before the end of the guarantee period within two weeks of the de-

fect being noticed. No guarantee claims will be accepted after the end of the guarantee period. The 

original guarantee period remains applicable to the device even if repairs are carried out or parts are 

replaced. In such cases, the work performed or parts 

fi

 tted will not result in an extension of the gua-

rantee period, and no new guarantee will become active for the work performed or parts 

fi

 tted. This 

also applies if an on-site service is used.

Also refer to the restrictions of this warranty concerning wear parts, consumables and missing parts as 

set out in the service information in these operating instructions.

Hornbach Baumarkt AG, Hornbachstraße 11, 76879 Bornheim / Germany

www.hornbach.com

Anl_PE_EAS_7520_SPK7.indb   121

Anl_PE_EAS_7520_SPK7.indb   121

14.10.14   10:48

14.10.14   10:48

Содержание 5599905





























































































































Отзывы: