
EN
71
REMOVING PAINT
Fit the protector nozzle
8
onto the heat
nozzle
1
of the heat gun.
1
SHAPING PIPES
Fit the reflector nozzle
6
onto the heat
nozzle
1
of the heat gun.
1
Make sure the reflector nozzle
6
is
securely fitted so that it cannot fall off
during use.
2
WELDING PLASTIC
Fit the reducer nozzle
7
onto the heat
nozzle
1
of the heat gun.
1
Make sure the protector nozzle
8
is
securely fitted so that it cannot fall off
during use.
2
Make sure the reducer nozzle
7
is se-
curely fitted so that it cannot fall off
during use.
2
DETACHING GLUE
Fit the flat nozzle
9
onto the heat noz-
zle
1
of the heat gun.
1
Make sure the flat nozzle
9
is securely
fitted so that it cannot fall off during
use.
2
SET TEMPERATURE
Slide up the heat selection switch
3
to
set the desired temperature:
1
70 °C
550 l/min
2
450 °C
350 l/min
3
600 °C
550 l/min
1
Set heat selection switch
3
to
0
to
switch the tool off.
2
Caution!
Make sure the tool and
nozzle are cool and the tool is
switched off and unplugged.
Caution!
Make sure the tool and
nozzle are cool and the tool is
switched off and unplugged.
Caution!
Make sure the tool and
nozzle are cool and the tool is
switched off and unplugged.
Caution!
Make sure the tool and
nozzle are cool and the tool is
switched off and unplugged.