background image

IMPORTANT!

Prior to installing and operating the winch, please read this manual thoroughly 
and carefully.  Keep this manual and all other instructions accessible at all times.

Although this manual will help you become familiarized with the operating pro-
cedures for the winch, it is by no means a substitute for proper training and the 
safe use of winches, barge rigging and other marine equipment.  Because own-
ers and operators are solely responsible for determining whether a particular 
usage is acceptable, only individuals trained in the proper use of winches, barge 
rigging and other marine equipment should operate winches.

The typical operational environment of winches includes very high forces, and 
the potential hazards associated with these forces should not be underestimated.  
Improper installation or misuse of the winch may result in injury to persons or 
cause equipment failure or damage.

ALWAYS OBSERVE THESE BASIC SAFETY PRE-

CAUTIONS:

• To reduce potential of electrical shock or other injury, turn off and lock out or tag 

out power source before initiating any maintenance or repairs.

• Keep all fi ngers, loose clothing and any foreign objects away from winch while in 

operation.

• During operation of the winch, always remain to the side of the winch, slightly be-

hind the gear motor.

• Never operate the winch from the front or when bystanders are in front of it.
• Operators and bystanders should stay clear of any load and the wire rope while the 

winch is operating.

• Under no circumstances, should any winch be used to move, raise or lower a 

person(s) or equipment.

• Do not operate the winch unless you have a fi rm stance on a non-slippery surface.
• Do not apply tension to the winch unless there are at least four complete wraps of 

rope on the drum.

• Inspect the winch carefully at least once a month for worn gears and pawls, cracked 

welds, and other damaged parts. If any worn, cracked or damaged parts are found, 
stop use immediately and  remove the winch from service until all appropriate repairs 
are completely made.

Содержание WWP30E-5-10-208-G-L/R
















Отзывы: