PATTA AAG07-100, Руководство по эксплуатации

Страница: 12 / 32

- 11 -
Hold the tool firmly, turn the tool on and
then apply the wheel or disc at an angle of
about 15° to the workpiece. (
Fig. 6
)
During the break-in period with a new
wheel, do not work the grinder in the B
direction, or it will cut into the workpiece.
Once the edge of the wheel has been
rounded off by use, the wheel may be
worked in both A and B directions. (
Fig. 6 )
CAUTION:
After operation, always switch off the tool and wait until the wheel has come to a complete
stop before putting the tool down.