RENTQUIP USA INC. | 1-800-818-1199 | WWW.PATRONPRODUCTS.COM
18E PRODUCT MANUAL
RENTQUIP USA INC. | 1-800-818-1199 | WWW.PATRONPRODUCTS.COM
MAINTENANCE
WARNING!
NEVER SERVICE THE HEATER WHILE IT IS PLUGGED IN, RUNNING OR HOT. SEVERE BODILY INJURE
OR ELECTRIC SHOCK MAY OCCUR.
ONLY QUALIFIED PERSONS ARE ALLOWED TO OPEN HEATER FOR SERVICE. NO USER-SERVICE-
ABLE PARTS INSIDE.
• Keep heater clean. Use pressurized air to blow fan blades clean. Note! Use moderate pressure to avoid
damage to fan blades
• Inspect heater before and after each use
• The fan motor is sealed and has permanently lubricated bearings
STORAGE
When not in use, the heater must be disconnected from power source, cleaned of dust and stored in a dry
place.
The power supply cord should be loosely wound around the handle of the heater.
TECHNICAL SPECIFICATIONS
HEAT OUTPUT
(2 STAGE SELECTOR)
BTU/Hr
65,000 or 45,000
19,000 or 13,000
AIRFLOW
CFM
590 or 1000
ELECTRIC CONNECTION
V ac / Hz
240 / 60 single phase or 3 phase
AMPERAGE DRAW (3 Phase)
A
Full: 47 Partial: 31
AMPERAGE DRAW (1 Phase)
A
Full: 81 Partial: 54
AMBIENT THERMOSTAT
temp. range
32 - 100 °F (0 - 40 °C)
LENGTH
inches
32.0
WIDTH
inches
14.0
HEIGHT
inches
20.0
WEIGHT
lbs
62.0
