Patrol Hawk 2AKOIPHGW, Руководство пользователя

Страница: 9 / 13

Example
:
Add and delete door
/
window sensor
1.Click to enter into the interface
of adding door/window sensor.
1. Click into SMS and phone
call numbers setting interface.
4. Click ok
,
App will automatically
recognize the door/window sensor.
2. Click the scan detection.
2. Click to set numbers, can setup
3 SMS and 3 phone call numbers
.
5. Adding successfully.
3. Scan QR code on the back of the
sensors.
3. After setting phone numbers,
click “ok” to finish settings.
6. All the accessories are added by
scanning QR code, simple and fast.
4.4.4 Set phone number for SMS message and phone call. (Note: this function are special for
GSM/WCDMA edition. While WiFi network is not working, it will automatically switch to
4.4.5
4.4.6
)
4.4.7
Modify admin password. (Note: please refer to step 4.4, according to App prompts.)
Modify installation address.
(
Note: please refer to step 4.4,according to App prompts
More settings.
Items
Functions
If WiFi network breakdown, host will push message. alert
If GSM/CDMA network breakdown, App will push alert message.
When arming, App will push message if door/window isn’t closed
properly.
alert
If accessories in low battery, APP will push alert message.
If power breakdown or out of power, App will push alert message.
When arm or disarm the panel, whether sending SMS alert.
The Siren volume can be adjusted,High
/
Medium/Low for optional.
The arming delay time can be chosen from 0~99s, default is 30s.
Delay alarm time could be chosen from 0~99 seconds, default is 0s.
Delay disarm time could be chosen from 0~99 seconds, default is 0s.
Siren alert time could be chosen from silent or 0~254s/keep alerting. Default is 90s.
Three group of timing arm can be setup.
Three group of timing disarm can be setup.
The alarm mode for wired zones: NC or NO, default is NC.
Temperature alarm can be set from Closed or 0 ~120
℃,
default alarm is 85
℃. ℃
Could set somebody at home reminder, the default is closed for this function.
GSM/CDMA Alarm function could be chosen from Closed/Open/Auto Change.
Three group of timing stay arm (home stay) can be setup.
When arm or disarm by remote controllers, whether need siren prompt.
WiFi network breakdown alert
GSM/CDMA
network breakdown alert
Door
/
window not closed alert
Accessories low battery alert
Power breakdown alarm
Arm
/
disarm SMS alert
Siren prompt when arm/disarm
by remote controllers
The volume of internal siren
Delay arming time (s)
Delay alarm time (s)
Delay disarm time (s)
Siren alert time (s)
Timing arm
Timing disarm
Timing stay arm
NC/NO alarm for wired zones
GSM/CDMA network alarm
Temperature alarm (
℃
)
Someone at home reminder
Enter a personalise name
for easily recognition.
Click here to delete all detectors.
13
12
Click here to delete sensors one by one.