Patriot Voice, Руководство пользователя, Страница: 4 / 23

SETTING UP YOUR PATRIOT® VOICE
Following these steps will ensure the best performance out of Patriot® Voice.
• Remove the protective film from the device.
• Choose a practical location for your read-out-system. It should be dry and clean.
• Make sure that the case is protected from lasting intensive sun exposure.
• Only use the console when air temperature is between 50°–90°F. When the device has been stored in a cold
environment for some time, put it in a heated room to acclimate for at least 2 hours before using it.
CONNECTING THE POWER CORD
First connect the round end of the cable into the back of Patriot® Voice, with the flat side of the cord facing the top.
Connect the other end of the cord into a wall outlet. In order to avoid any damage of the device or the plug, check to
see if you properly connected the plug to the socket. After checking all plugs, you’re ready to power Patriot® Voice.
TURNING THE SYSTEM ON AND OFF
Starting the system couldn’t be easier. To start the system, press the
main-switch
button located to the left of the
volume knob on the front panel. After a couple seconds, Patriot® Voice starts automatically and lets you know that
you are in the main-menu and that the proper menu-point-to-scan documents is activated. Press the
scan and read
out
key. The document should start scanning. Scanning lasts approx. 20–60 seconds.
To turn off the system, press the main-switch again, located to the left of the volume knob on the front panel. Now
the system will be closed and switched off automatically.
4