Have questions? Call
800-USA-1-USA
(800-872-1872) or visit our website at
www.ritron.com
page
6
RECEIVE 2-TONE PAGE
To use 2-tone paging the SST "D-Series"
radio must be PC programmed for this
option
, the radio does not operate with 2-tone
decoding as it is received from the factory. See
your Ritron dealer or contact Ritron directly for PC
programming of this option.
To activate 2-tone paging you must first select a
radio channel that has been PC programmed for
2-tone paging decode. The radio is normally
programmed to automatically activate 2-tone
decode any time the paging channel is selected.
If not, simultaneously press both of the volume
buttons and hold briefly before releasing. The
handheld sounds three beeps when 2-tone
paging is turned on. If you are unable to set the
radio, you have selected a channel that is not
programmed for 2-tone paging decode.
When receiving a 2-tone page the radio will emit a
"ring" tone similar to a telephone and
the display will show a "C" to
indicate that a call has been
received. You can now proceed
with normal two way communication
until 2-tone paging has been reset.
The "ring" tone will sound every time
a 2-tone page is decoded.
To reset 2-tone paging after receiving a call,
simultaneously press both of the volume buttons
and hold briefly before releasing. The handheld
sounds three beeps when 2-tone paging is reset
and the display will show the channel number.
The radio can be optionally programmed to
automatically reset if a call is not answered
within 15 seconds.
2-tone paging channels can be optionally
programmed to:
Automatically set the radio for 2-tone paging
mode whenever the channel is selected.
Automatically reset if a 2-tone page is not
answered within 15 seconds.
Automatically place the receiver into carrier
squelch "monitor" mode whenever a 2-tone
page has been decoded.
Transmit a transpond tone to let the paging
station know that the page has been received.
Decode an All Call tone.
Decode a Group Call if the 1st tone is sent for
an extended period of time.
SEND 2-TONE PAGE
To use 2-tone paging the SST "D-Series"
radio must be PC programmed for this
option
, the radio does not operate with 2-tone
encoding as it is received from the factory. See
your Ritron dealer or contact Ritron directly for PC
programming of this option.
To send a 2-tone page you must first select a
radio channel that has been PC programmed for
2-tone paging encode. Once the channel has
been selected, press and hold the Channel
button. After 2 seconds the radio will send the
2-tone page and the tones will be heard on the
speaker. Release the Channel button and proceed
with normal 2-way communications.
If you are unable to send a 2-tone page, you have
selected a channel that is not programmed for
2-tone paging encode.
CH
ON
OFF/HOLD
VOLUME
FIG-4: RESET 2-TONE PAGING
To reset 2-tone paging after receiving a call,
simultaneously press both of the volume
buttons and release. 2-Tone paging is reset
when the radio sounds three beeps.
OPERATION
