Patriot PBE140, Руководство пользователя

Страница: 22 / 25

Systematics, Inc. West Chester, PA. 19380 23
TIG WELD WITH YOUR
PATRIOT MIG WELDING SYSTEM
(PBE140, PBE180 & PBE250)
The TIG Welding Process is used to produce the highest quality, porosity-free
welds. The TIG PACK adds TIG Welding capabilities to your Systematics Patriot
MIG Welder.
The TIG PACK is designed for Tungsten-Inert Gas (TIG) welding with Direct
Current, Straight Polarity (DCSP) on steel, stainless steel, chrome-moly, copper
or cast iron (18 Ga. minimum plate thickness).
THE TIG PACK WILL NOT WELD ALUMINUM.
The TIG PACK consists of a 200 amp, gas cooled torch with built-in gas control
valve and remote on-off switch, 12-1/2 or 25 foot cable assembly and accessories
required for putting the unit in service.
SPECIFICATIONS
Part Number ........................ TP 2112P (12-1/2' cable)
TP 2125P (25' cable)
Torch Rating ........................ 200 Amps, DCSP
Duty Cycle ........................... 100% (reduce duty cycle when
operating over 200 amps.)
Cooling Method ................... Gas(100% ARGON)
Shielding Gas
Control Method ............... Gas Valve on Torch
Welding Current
On-Off Control ................ Locking Switch onTorch
MHG7
ONE POUND SPOOL GUN
FOR ALUMINUM MIG WELDING
WITH THE SYSTEMATICS PATRIOT
MIG COMBINATION SYSTEMS
(PBE140, PBE180 & PBE250)
The MHG7 (Motorized Hand Gun System) is a compact, light-in-weight, easy
to operate MIG welding system designed for aluminum welding. It will feed
.023" Thru 3/64" diameter wire from 4 inch spools. The standard equipment
cable is 25 feet in length. 35 foot and 50 foot cables are optional. The wire
speed control knob is built into the gun handle.
With the following options, the MHG7 can also be used to weld steel or
stainless steel (.030"-.035" diameter wire size).
HG-160K Knurled Drive Roll for steel wire
M5-T30 Contact tip - for .030" steel wire
or M5-T35 Contact tip - for .035" steel wire
SPECIFICATIONS
Part Number ....................... MHG7
Gun Rating ......................... 200 Amps @ 100% duty cycle
250 Amps @ 60% duty cycle
Wire Feed Speed Range ...
50 to 650 inches per minute
Cooling Method .................. Air (gas)
CONTENTS OF TIG PACK
1 each TIG Torch with built-in valve
1 each Locking Electric Switch with 14 foot cord
(installed on torch)
1 each 12-1/2 foot Power Cable with Connector
(installed on torch)
1 each 15 foot Gas Hose with fitting
(installed on torch)
3 each 3C116 Collet - for 1/16" tungsten
3 each 3C332 Collet - for 3/32" tungsten
2 each 3CB116 Collet Body - for 1/16" tungsten
2 each 3CB332 Collet Body - for 3/32" tungsten
2 each 3C6 Gas Cup - 3/8" orifice
6 each 3C7 Gas Cup - 7/16" orifice
2 each 3C8 Gas Cup - 1/2" orifice
1 each 300L Long Backcap
3 each 1/16" X 3" Tungsten Electrode
3 each 3/32" X 3" Tungsten Electrode
MHG7 SYSTEM COMPONENTS
1 each MHG7 Spool Gun (only)
1 each HGC5-25 Hand Gun Cable Assembly
with fittings - 25 feet length
7 each MG-TXX Contact Tip (1 installed in gun)
2 - .030 (MG-T30)
3 - .035 (MG-T35)
2 - 3/64 (MG-T364)
1 each M35-NA62 Nozzle Assembly
(installed on gun)
1 each M35-D Gas Diffuser
(installed on gun)
OPTIONS
TIG PACK
THE TIG PACK WILL NOT WELD ALUMINUM.
THE TIG PACK WILL NOT WELD ALUMINUM.